Filter
Top Products
2
TABLE OF CONTENTS
CASTER SAFETY..................................................................................2
ASSEMBLY INSTRUCTIONS...............................................................2
Tools and Parts..................................................................................2
Unpack the Casters........................................................................... 2
Install Casters ....................................................................................2
Complete the Assembly .................................................................... 3
ÍNDICE
SEGURIDAD DEL RUEDECILLA.........................................................4
INSTRUCCIONES DE ENSAMBLAJE.................................................4
Piezas y Herramientas .......................................................................4
Desempaque las ruedecillas .............................................................4
Instale las ruedecillas......................................................................... 4
Complete el Ensamblaje.................................................................... 5
TABLE DES MATIÈRES
SÉCURITÉ DE ROULETTE ..................................................................6
INSTRUCTIONS D’ASSEMBLAGE......................................................6
Outils et pièces...................................................................................6
Déballage des roulettes..................................................................... 6
Installation des roulettes.................................................................... 6
Achever l’assemblage ....................................................................... 7
CASTER SAFETY
ASSEMBLY INSTRUCTIONS
Tools and Parts
Check that you have everything necessary for correct assembly.
Proper assembly is your responsibility.
Tools Needed:
Parts Supplied:
Unpack the Casters
1. Open the lower compartment door and remove the box
containing the casters from the full width wire basket.
2. Close the lower compartment door.
Install Casters
NOTE: Install the casters before you install any of the FeaturePak
items.
1. Open the lower compartment door and remove the base grille.
Remove the grille by grasping the grille with both hands, lifting up
and pulling bottom of the grille toward you.
You can be killed or seriously injured if you don't immediately
You
can be killed or seriously injured if you don't
follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
■ ¹⁄₂" Socket wrench or nut
driver
■ ¹⁄₂" Wrench
■ ³⁄₈" Socket wrench or nut
driver
■ Rigid Casters (2)
■ Swivel Casters (2)
■ ⁵⁄₁₆–18 Self-locking hex-
nuts (16)
■ ⁵⁄₁₆–18 X ⁷⁄₈" Hex-
head bolts (16)
■ ¹⁄₄–20 X 1 ¹⁄₄" Hex-head bolts
(4)
■ ¹⁄₄–20 x 1 ¹⁄₄" lock washers (4)
■ Caster brackets (located in
FeaturePak) (2)
■ Plastic skids (shipped with
the convertible refrigerator/
freezer)
WARNING
Excessive Weight Hazard
Use two or more people to move and install convertible
refrigerator/freezer.
Failure to do so can result in back or other injury.