Filter
Top Products
4. Using the allen wrench (25) and multi-function
wrench (26), tighten the compression nut (24)
onto the flange connector at least 1/8 turn past
finger tight. This provides a firm connection to
the motor shaft.
TI17258a-1
5. Ensure that the drive shaft hex (C) engages the
hex socket (D) in the flange connector. Screw
the base of the speed controller into the threads
at the top of the air motor until hand tight.
TI17259a-1
6. Connect the air tubing (27) between the speed
controller tube connector (29) and the air motor
tube connector (21).
TI17253a-1
7. Return the unit to service. Connect the main air
line to the quick-disconnect fitting (28) on the
speed controller.
4
3A1315A