WarningsWarnings
Warnings
The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The
exclamation point symbol alerts you to a general warning and the hazard symbols refer to procedure-specic
risks. When these symbols appear in the body of this manual or on warning labels, refer back to these
Warnings. Product-specic hazard symbols and warnings not covered in this section may appear throughout
the body of this manual where applicable.
WARNINGWARNING
WARNING
FIREFIRE
FIRE
ANDAND
AND
EXPLOSIONEXPLOSION
EXPLOSION
HAZARDHAZARD
HAZARD
Flammable fumes, such as solvent and paint fumes, in workwork
work
areaarea
area
can ignite or explode. To help
prevent re and explosion:
• Use equipment only in a well ventilated area.
• Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and
plastic drop cloths (potential static arc).
• Do not plug or unplug power cords or turn lights on or off when ammable fumes are present.
• Keep work area free of debris, including solvent, rags, and gasoline.
• Do not plug or unplug power cords, or turn power or light switches on or off when ammable
fumes are present.
• Ground all equipment in the work area. See GroundingGrounding
Grounding
InstructionsInstructions
Instructions
, manual 3A0732.
• Use only grounded hoses.
• Hold gun rmly to side of grounded pail when triggering into pail.
• If there is static sparking or you feel a shock, stopstop
stop
operationoperation
operation
immediatelyimmediately
immediately
. Do not use
equipment until you identify and correct the problem.
• Keep a working re extinguisher in the work area.
SPECIALSPECIAL
SPECIAL
CONDITIONSCONDITIONS
CONDITIONS
FORFOR
FOR
SAFESAFE
SAFE
USEUSE
USE
Static charge may build up on plastic parts during cleaning and could discharge and ignite
ammable vapors. To help prevent re and explosion:
• Clean plastic parts only in well ventilated area.
• Do not clean with a dry cloth.
• Do not operate electrostatic guns in equipment work area.
2
334011B