Graco 334011B Food Processor User Manual


  Open as PDF
of 6
 
Installation
InstallationInstallation
Installation
WallWall
Wall
PackagesPackages
Packages
1. Install bracket to the side of the existing air motor
bracket. Secure using bolts (6), washers (9), and
nuts (10).
2. Slip bracket holes over bolt heads and slide into
place.
3. Tighten bolts.
4. Grease adapter o-ring (11).
5. Install pump hose tting (2b) into the lower and
tighten the jam nut (2c)
6. Open clamp (4) around hopper outlet.
7. Use 7/8” hex on outlet hose tting (2a) to rotate
the hose in the hopper (1) for optimal t in the
bracket (8).
8. Tighten the adjustable screw on the clamp (4)
and close latch.
NOTE:NOTE:
NOTE:
The adjustable screw should be tight
enough that the latch on the clamp has rm
resistance when closing.
StandStand
Stand
PackagesPackages
Packages
1. Loosen the two stand bolts on either side of the
existing air motor bracket.
NOTE:NOTE:
NOTE:
Nuts (10), washers (9), and bolts (6) are
used with wall packages only.
2. Slip bracket holes over bolt heads and slide into
place.
3. Tighten bolts.
4. Grease adapter o-ring (11).
5. Install pump hose tting (2b) into the lower and
tighten the jam nut (2c).
6. Open clamp (4) around hopper outlet.
7. Use 7/8” hex on outlet hose tting (2a) to rotate
the hose in the hopper (1) for optimal t in the
bracket (8).
8. Tighten the adjustable screw on the clamp (4)
and close latch.
NOTE:NOTE:
NOTE:
The adjustable screw should be tight
enough that the latch on the clamp has rm
resistance when closing.
4
334011B
 previous next