Filter
Top Products
Crathco
®
5000 Series Manual Page 3
WARNING LABELS
OPERATOR'S SAFETY PRECAUTIONS
1) Read and understand the operating instructions in this manual thoroughly.
2) Note all warning labels on the freezer. If any of the warning labels are missing or damaged replace them
immediately.
3) Do not wear loose fitting garments or jewelry which could cause a serious accident.
4) Stay alert at all times during operation.
5) Keep operating area clean.
6) Do not operate freezer if any excessive noise or vibration occurs. Contact your authorized service agent.
Located on the right, left and rear panels.
INSTALLATION
Shipment
Transit
1) The freezer has been operated and tested at the factory. Upon
arrival the complete freezer must be thoroughly checked for any
damage which may have occurred in transit. Note: A tip (N) Tell
warning device is placed on each shipping carton at the factory.
If the arrow tip is blue, the carton has been tipped in transit. (See Figure A)
2) THE CARRIER IS RESPONSIBLE FOR ALL DAMAGE IN
TRANSIT WHETHER VISIBLE OR CONCEALED. DO NOT
PAY THE FREIGHT BILL until the freezer has been checked for
damage. Have the carrier note any visible damage on the freight bill.
If concealed damage and/or shortages are found later, advise the
carrier within 10 days and request inspection. The customer must
place any claim for damage and/or shortage with the carrier.
Grindmaster Corporation cannot make any claims against the carrier.
Figure A