Filter
Top Products
Model H6069 Wet Sharpener-8-
MAINTENANCE
Reservoir Rinsing
With use, the water reservoir will begin to
fill with ground material from the objects
being sharpened and wheel particles
removed during the sharpening process.
Keep the water reservoir clean and free of
residue build up.
To rinse the water reservoir:
1. UNPLUG THE SHARPENER FROM
THE POWER SOURCE.
2. Tilt the sharpener to drain any water
in the reservoir through the drain
trough on the back of the sharpener.
3. Move the tool rest away from the
grinding wheel.
4. Fill the reservoir with fresh water and
empty from the drain trough. Repeat
until clean.
Reduce the risk of electrocution by
keeping all connections dry and off
the ground. DO NOT touch plugs
with wet hands. Failure to follow
these warning could result in seri-
ous injury.