Filter
Top Products
-4-
Model T10699 (Mfg. Since 2/13)
11. Attach Front Piece (B) to Bottom Piece (A)
and Side Pieces (D).
12. Place the panels on Guide Bars (F).
13. Attach dust port over hole in Rear Piece (C).
D
C
A
E
E
D
C
A
E
E
B
D
A
D
C
A
E
Operation
The downdraft sanding table helps reduce air-
borne dust while sanding with a handheld electric
sander.
The dust port is connected to a shop vacuum or
dust collector, and a workpiece is placed on top
the downdraft table and sanded with an electric
handheld sander. As dust comes off the sander,
it is sucked through the downdraft table holes
and into the vacuum or dust collector—instead of
becoming airborne in the shop.
D
C
A
E
E
Work Stops
Work Stops
The downdraft table kit includes four work stops.
The work stops can be placed inside the panel
holes to act as a barrier, preventing unwanted
workpiece movement when sanding.
PT10699001
PT10699002
Replacement Parts
Replacement rubber grommets and work stops
can be purchased if they get lost or damaged.
To reduce risk of eye inju-
ry or lung damage from
dust, always wear safety
goggles and a respirator
when operating machine!