Grundig UM 9050 Food Processor User Manual


 
27ENGLISH
SAFETY AND SET-UP ______________________
Only the glass bowl and glass jug can be
used in the microwave oven.
Do not use the appliance for anything other
than its intended use. The appliance is de-
signed for processing food only.
Never switch on the appliance for longer
than necessary for processing the food.
Never use the appliance with damp or wet
hands.
Only operate the appliance with the parts
supplied.
The appliance is designed to process only
common household quantities.
Do not use the appliance if the blades are
damaged or show signs of wear.
Always use the appliance on a stable, flat,
clean and dry surface.
Make sure that the power cord cannot be
accidentally pulled or tripped over when the
appliance is in use.
Position the appliance in such a way that the
plug is always accessible.
The spatula may be used to remove the
food from the glass bowl and glass jug. Make
sure the appliance is switched off before
doing this.
Remove any bones and stones from food to
prevent the blades and the appliance from
becoming damaged.
When using for the first time, the odour from
the base unit is normal.
Never feed food by hand. Always use the
pushers.
Make sure that the swivel head is securely
locked into place before operating the appli-
ance. Switch the speed control button to the
Off position and press the unlock button to
open the swivel head.
Safety lock system
Caution
The appliance is equipped with a safety
lock system to prevent damage caused by
improper use or overloading. If the safety lock
system detects overheating or overloading,
the power switches off and the base unit stops
automatically. If this happens during opera-
tion, please proceed as follows:
1 Switch the speed control button
C
to the
Off position.
2 Disconnect the power plug from the wall
socket.
3 Remove the glass bowl or glass jug and take
out all foodstuff inside. If the blades or other
accessories are blocked by the food, clean
them carefully.
4 Wait at least 30 minutes for the appliance to
cool down.
5 After at least 30 minutes, place the glass bowl
or glass jug on the appliance and insert the
plug into the wall socket.
6 Continue operating the appliance by follow-
ing the instructions in this manual. If the appli-
ance does not start, wait another 30 minutes
and repeat steps 5 and 6.