Haier AFD630IX Refrigerator User Manual


 
Function introduction
Press and hold key A10 for 3 seconds, corresponding indicator will go off, the display panel will go off
and the refrigerator will stop operating.
Press and hold key A10 for 3 seconds again, corresponding indicator will light up, the display panel
will light up, and the refrigerator will start operating normally.
This function is not equivalent to turning off the power.
When E or F is displayed due to fault, the refrigerator can still refrigerate. Please contact professional
after-sales service personnel as soon as possible.
Fault indication
Control panel
A1 Switch on/off the fridgestorage
compartment
A2 Menu key
A3 Temperature up
A4 Temperature down
A5 Confirmation key
A6 Power ON/OFF
B Super coolingicon
C Holidayfunction icon
D Fridge storagetemperature display
E Fridge compartmentindicating icon
F Freezercompartment indicating icon
G Alarm icon
H Freezer storage temperaturedisplay
I Super freezingicon
J Icemaker icon (only on models with an
icemaker)
K Water input timeadjustment icon
(only onmodels with anicemaker)
3 Models AFD631CX/AFD631CB/AFD631CS/AFD630IX/AFD630IB/AFD630IS
Initial powering on
When the refrigerator is powered on for the first time, icon G will light. The fridge storage temperature
will be displayed as “-” due to high temperature inside. The freezer storage temperature will be
displayed as“- -” due to high temperature. The buzzer will beep. Press key A5, the buzzer will be
silenced and icon G will remain lit. After the temperature decreases to certain level, icon G will turn off
and the displayed temperatures of the fridge storage compartment and the freezer storage
compartment will become the ex-factory settings “5” and “-18” respectively.The brightness of D,E, H
icon will decrease to half automatically when the refrigerator is not being operated.
13