Haier FCD-360 Freezer User Manual


 
Electrical Requirement
• Make sure there is a suitable power Outlet
and proper grounding to
Note: For personal safety,this appliance must be properly ground.
Consult a qualified electrician or service center if the grounding
instruction are not completely understood ,or if doubt exists as to
whether the appliance properly grounded.
•Donot install your freezer in any location not properly insulated or
heated e.g. garage etc.
• Select a suitable location for the freezer on a hard even
surface away from direct sunlight or heat source e.g. radiators,
baseboard heaters, cooking appliances etc. Any floor unevenness
should be corrected.
Install Limitations
the freezer.
6
Freezer Features And Use
General Features
Adjustable temperature dial:
Your freezer will automatically maintain
the temperature level you select. The
temperature control dial has 6 settings
.“1”isthe warmest, 6”isthe coldest
Set the dial to 4
and allow 24 hours to pass before
adjusting the temperature to your needs.
(Note: If the freezer has been
placed in a horizontal or
tilted position for any period
of time wait 24 hours before
plugging the unit in.)
• Once the freezer is in its proper place, plug it in an proper electrical outlet
Set the temperature, on the temperature control knob. 1being the
warmest and 6 being the coldest. Initially set the temperature on “4”.
Place food inside the freezer (green light will come on indicating that the
freezer is in operation). After using the freezer for 24 hours set the
freezer to your desired setting.
•Incase you unplug your freezer or experience an electrical outage,
allow 5 minutes before plugging it back in.
Operating Your Freezer
7