Filter
Top Products
English
14
Filling Dishwasher Detergent
Use the recommended amount of
detergent for your wash loads.
Measure and pour the detergent
into the large compartment for
the main wash. The detergent for
the pre-wash goes into the small
compartment next to the main
wash compartment. Push the
cover latch in to open dispenser
compartment door.
Note: For the pre-wash you should use one-half the amount of detergent
that you use for the main wash.
• We recommend that you use a Rinse Agent to help remove spots and prevent
new film build-up on your dishes, glasses, flatware, cookware and plastic.
Note: Use only a liquid form of rinse agent in the dispenser.
Pouring liquid rinse agent into the dispenser
Use the recommended amount of rinse agent for your wash loads. The rinse
agent dispenser is located next to the deter
gent dispenser. During the wash
cycle, it automatically releases a preset amount of rinse agent during the last
rinse cycle.
To fill rinse agent in the dispenser turn the knob on the dispenser in a counter
clock direction. One the knob is lined up with the marker pull off the knob. Now
you can pour liquid rinse agent in the dispenser.
When the dispenser is full, the see through rinse agent level indicator will be
dark. When it is empty, it will be clear which means you need to pour in more.
Note: A full dispenser should last approximately one
month. If you want to adjust the amount of rinse agent
dispensed, the dispenser has 1 to 6 levels that you can
adjust to. Simply rotate the dial to your desire settings.
main wash
detergent
compartment
compartment door latch
pre-wash
detergent
compartment
detergent
compartment lid
rinse agent
level indictor
lock marker
rinse dispenser
knob
at this time you should
refill to eliminate spotting
rinse agent
compartment