Filter
Top Products
English
16
Canceling a cycle
A cycle can be cancelled at any time by slowly turning the cycle selector
knob clockwise till the dishwasher starts to drain. After draining open the
door and turn the selector knob to the off position.
Changing a cycle
A cycle can be changed at any time by lifting door latch to stop the cycle.
If desired, at this time change the heated dry option. Turn the selector knob
to the required cycle. Turning the cycle selector knob can cause the
detergent dispenser to release the detergent. Check the detergent
dispensers. They must be filled for the new cycle. Close the door till it
firmly latches. The dishwasher now starts a new cycle.
Drying
During the drying cycle you will see steam escaping through the vent
located on the upper left side of the dishwasher door. This is normal as
heat dries the wash load.
CAUTION: The vapor is hot. DO NOT touch the vapor or the vent during
the drying process.
Overfill protection float
This pr
otection float is situated in the front right corner of the dishwasher
tub. It keeps the tub from over filling. Check under the float to remove
objects that may prevent it from moving up or down.