Filter
Top Products
Left/right door opening function
This product provides the function of left/right
door opening, so you can realize the function
of opening door from right side by the following
step according to actual necessity.
1. Dismantle three screws of lower door hinge
for later use.
2. Carefully move downward and take out the
door, and carefully put it aside.
3. Dismantle part①, install it on right
corresponding position, and tighten it.
4. Dismantle part③, and fix it in the left hole of
the lower hinge②.
5. Use tool such as wrench to dismantle upper
hinge axle④, and install it on right
corresponding position.
6. Take the door, and carefully install it over
the hinge axle④.
7. Install the three screws dismantle in step 1 to
the left lower door hinge②.
8. Dismantle the hole-cover of door handle for
later use.
9. Dismantle door screw cover and screw⑦, and
install door handle⑤ on the right corresponding
position, then tighten it. Install the hole cover
taken in step 8 on the right side.
10. After completing installation of the door,
repeat opening and closing door for several
times, to ensure no abnormal noise, and tight
installation of all screws and hinge axles.
Usage preparation
6