Haier HGN-36100EB Microwave Oven User Manual


 
9
MULTI-STAGE COOKING
Your oven can be programmed for up to 3 automatic cooking sequences. Some recipes may require
setting a multi-stage program involving defrosting and microwave cooking at different power levels.
The following example shows the steps in setting up such a program.
1. Touch CANCEL pad to reset the system.
2. Input a jet defrost program.
3. Touch MEMORY pad.
4. Input microwave cooking program.
5. Touch MEMORY pad again
6. Input another microwave cooking program with probably lower power level settings.
7. Touch START pad.
Note:
JET DEFROST or WEIGHT DEFROST must be set as the first stage in a multistage cooking program
while EXPRESS COOKING is unavailable.
After cooking, the oven’s signal will sound and END will be displayed.
PRESET
This function allows you to set the oven to start a cooking program in a later time within the oven's
clock cycle (12 hours).
For example: suppose it is 11:10, and you want to set the oven to start a cooking program at 11:30,
you could:
1. Place food in the oven
2. Touch PRESET pad.
3. Touch number pads to enter 11:30.
4. Set your desired cooking program.
5. Touch START pad.
EXPRESS COOKING
With express cooking, you can touch the EXPRESS pad once or a number of times to enter your
desired cooking time and the oven will work at full power level. The maximum cooking time is 2
minutes.
Suppose you want to set the oven to microwave for 1 minute at 100% power level.
1. Touch the EXPRESS pad 3 times, "1:00" will appear in the display.
2. Touch START pad.
Note:
Touch Once 15 seconds
Touch Twice 30 seconds
Touch 3 Times 1 minute
Touch 4 Times 2 minutes