Filter
Top Products
Safety precautions
Do not spray water onto the refrigerator, or place
it in wet area susceptible to be splashed with water,
so as to avoid influencing the electric insulation
performance of the appliance.
4
It is strictly prohibited to privately dismantle or
change the appliance. For the repair of refrigerator,
it can be carried out by professional only.
Do not put the bottled beer or beverage in the
freezer compartment to prevent frost crack.
At no power supply or when carrying out cleaning,
it is required to pull out the power plug, and to wait
at least 5 minutes for switching on it again to
prevent damaging its compressor by continuous
starting.
When the appliance is to be discarded, dismantle
its door, as well as its door gasket to avoid accident
occurred when a child goes inside for playing.
1.The gap between door and door, and the gap
between door and cabinet are very small. Take
care not to put your fingers in these areas to
prevent hurting your fingers by squeezing.
It should be located in a well-ventilated place, and
there should be at least 10cm of free space
surrounding the refrigerator including its back. If
you want to build the appliance in a wall, there must
be at least 25cm of free space above the appliance,
and it must be at least 5cm away from the wall.
Do not place it in area damp or susceptible to be
splashed with water. Any splashed water or dirt
should be wiped by soft cloth in time.
Refrigerator should be kept far from heat source
and avoid direct sunshine, so as not to affect the
refrigerator working performance.
5
Placing surrounding
Be sure not to put it in such a cold
environment as to freeze water
Space
At least
10cm from
above
At least
10cm from
back
At least
10cm from
left/right
The refrigerator should be placed on even, solid ground. When it is necessary to make it level by insert
something to raise it, the insert chosen should be steady, hard, and incombustible. It is absolutely prohibited
to use package foam block of the appliance as the insert. If it is just slightly uneven, you can make it level
by turning the adjusting roller. You can raise the appliance by turning clockwise the adjusting threads of
two front rollers, and, similarly, by turning anticlockwise, the appliance can be lowered.
adjusting roller
clockwise
anticlockwise