Filter
Top Products
Usage of accessories
8
Shelf height can be adjusted
You can adjust the shelf height according to your storage necessity.
First, lift and take the shelf out, insert the top hook in the back hole of the refrigerator, then putting it down to
lock it.
Snack box
The snack box can be moved to appropriate position as
necessary.
When dismanting
When installing
Tilt upward
Raise to take it out
Slide
High
Low
Humidity adjustable vegetable tray
When storing fruits and vegetables, do your best to remove completely any water cumulated on the bottom
of vegetable tray, and wipe dry the vegetable tray.
This vegetable tray is able to adjust its humidity degree according to its storage necessity. When storing
vegetable, you can push the slide to the "high" side to provide a high degree of humidity for vegetable. When
storing fruits, push the slide to the "low" side to provide a low degree of humidity for fruits.
Lower to get lock
Insert lock
9
About the refrigerator compartment
Put those foodstuffs in refrigerator
compartment to be stored for short
time or to be eaten any time:
Although it is possible to make the majority of space
of the refrigerator compartment to be at an average
temperature between 0-10℃ through adjusting
temperature positions, it is still impossible to keep food
fresh for long time, so the refrigerator compartment
can only be used as a short time storing room.
Recommended spaces for various
foodstuffs
Due to cold air circulation in the refrigerator
compartment, the temperatures inside the
compartment vary with locations. Area ⑥ is the coldest
part of the refrigerator compartment, so different kinds
of food should be put in different areas.
① Eggs, butter, cheese, and the like
② Ring-top can, canned food, condiment, etc
③ Beverage, and various bottled foodstuff
④ Souse food, can, etc
⑤ Meat product, pot food
⑥ Cooked wheaten food, cans, milk, bean curd, and
the like
⑦ Prepared meat food, sausage, and the like
⑧ Fruit, vegetable, salad, etc
Lamp and lamp replacement
This refrigerator has a ligth. 220V, 40W
Lamp holder: E26 (lamps exceeding 40 must not be
used)
When replacing the lamp,
●
Unplug to disconnect the power
●
Remove the food shelf and press the lamp shade
to release the lugs from the slot then the light shade
can be removed.
●
Turn the lamp anti-clockwise for removing.
●
Insert the lugs on the shade into the square holes,
and the hold the rear of the lamp shade and pull to
locate.
①
④
③
⑤
⑥
②
⑧
⑦
Rear
Lugs
Rear