English
8
Interior Shelves
To remove or replace a full-width slide-out shelf: (see fig. # 4)
1. Gently tilt the shelf up and slide
forward until the shelf has been completely
removed.
2. To replace the shelf, gently slide the shelf back.
Reversing Interior Shelf
:
1. When storing a 2-Liter bottle in the door, the
shelf should be installed with the indent side
facing out and on the left
2. When not storing a 2-liter bottle in the door, the
shelf should be installed with the indent side facing in on the right side.
Dispense-A-Can™
The refrigerator has a convenient "Dispense-A-CanTM" storage
compartment. Simply stack cans vertically, loading from the top and drawing
them from the bottom.
Defrosting Your Refrigerator
• For maximum energy efficiency, defrost freezer section whenever frost
accumulates to a thickness of 1/4" or more on freezer walls. Note that frost
tends to accumulate more during the summer months.
• To defrost, remove the food and ice cube tray from the freezer section. Make
sure the drip tray is under the freezer
section and turn off the thermostat.
Defrosting may take a few hours.
• While defrosting, water will accumulate
in the drip tray. The drip tray may also
need to be emptied during the defrost
process. Do not leave unattended. (see
Fig. 5)
• After defrosting, empty and wipe down
the drip tray, as well as the interior of
the refrigerator.
fig. 5
drip tray
fig. 4
English
English