Filter
Top Products
Preparation before Use
9
1. Dismantle all subassemblies
The foam base seat as well as the adhesive
WDSHDVD¿[HGDGGLWLRQDOSDUWPXVWEHDOVR
dismantled.
2. Check all the additional parts and materials with the
machine.
7KHDUWLFOHVLQWKHER[PXVWEHFKHFNHGDFFRUGLQJWRWKHGHVFULSWLRQV
on the incasement list, and if there is any difference between the
description on the incasement list and the actual case, please consult
the seller shop for information.
3. Place the refrigerator at a proper
position
(See the previous “Position Environment”
4.The installment of the decorating articles at the base.
Open the door of the refrigerant room and from the refrigerant room
take out the decorating articles and install them at the proper positions,
and drill the bolts.
For the convenience of searching information, the number of the refrigerator and the
number of manufacturing should be copied on the guarantee issue.
7. It is recommended that before being used the
UHIULJHUDWRUVKRXOGEHFOHDQHG¿UVW
Before putting food into the refrigerator, please clean the inside and
outside of the refrigerator completely using the baking soda diluted
by water (by the ratio of 4L water to a spoon of baking soda).
8. Place the refrigerator without turning on
the power.
$IWHUWKHUHIULJHUDWRULVSODFHGDWDÀDWSRVLWLRQDQG
cleaned, don’t turn on the power immediately, rather
you should place the refrigerator for about 6 hours
without turning on the power. After at least 6 hours,
turn on the power so that the refrigerator can operate
well.
Note
Usage
1
Turn on the power
After turning on the power, the chill-cold storage temperature, the
deepfreeze refrigeration temperature will be automatically four levels,
and the default value of time is 12:00, and the door body vision board
is in the state of unlocking.
3. Put the food into the refrigerator
The refrigerator will be cooled completely after a period of being
powered on and operates for a period of time, and then the foods can
be put into the refrigerator and the refrigerator is used normally.
2
The operation of the refrigerator
Adjusting way with hands: you may press the temperature
adjusting button to design for the operation of the
refrigerator (see the following “Instruction of Functions”).
After the temperature is changed, a
EDODQFHRIWKHLQER[WHPSHUDWXUHVDQ
only be achieved after a period of time.
And the length of this period of time
depends on the degree of the change
of the temperature, the ambient
temperature, and frequency of opening
the door, and the amount of stored
food in the refrigerator, and so on.
NOTE