Haier PBFS21 Refrigerator User Manual


 
Removing and Installings the Doors
Before the door body installment and dismantlement, please take out the food on the door
body rack, dismantle the bottle seat, and then cut the refrigerator off, turn off the water
source, in case a life injury, product loss or property loss may be caused.
During the door body installment and dismantlement, please ask two or more special persons
carry out the following operations in case of the possibility of life injury or r product loss or
property loss.
Chill-cold storage Right Door Body Installment and Dismantlement
1.Dismantle the bolts on decorating articles of the
refrigerator body, and then take decorating articles
off the refrigerator body.
2.Please dismantle the bolts using a screwdriver, and take the up
gemel, and then take the refrigerant door body off and place it at a
proper position.
3.Please dismantle the middle gemel if needed.
4.Install the refrigerant door body in a direction that
is converse to the above direction.
When lifting up the gemel and making it separated from the door body, please prevent the
door body slanting forwards.
Chill-cold storage Left Door Body Installment and Dismantlement
)LUVWFDUU\RXWWKH¿UVWVWHSRIWKHFKLOO
cold storage door body installment and
dismantlement.
2.Cut the power line connecting off and cut the water pipe connecting,
dismantle the bolts using a screwdriver, and take the up gemel, and then
take the deepfreeze refrigeration door body off and place it at a proper
position.(Only for PBFS21EDAW/B/V/S)
5
Note
Note