Filter
Top Products
10
PROBLEM
Coffee not dispensing.
Water reservoir fills too
slowly.
Failed foil seal.
PROBABLE CAUSE
• Piercing nozzle is clogged with coffee grounds. Turn unit off; unplug. Allow unit to cool
completely. To remove any built-up coffee grounds, insert end of bent paper clip into eye of
piercing nozzle.
• Unit hasn’t cooled down. Allow 2 minutes between brewing cycles.
• Try filling water reservoir before pushing down brew basket handle to pierce K-Cup
®
* pack.
Start brewing cycle.
• There is variability in the K-Cup
®
* manufacturing process which causes some types of K-Cup
®
*
packs to be weaker at the seams. Let cool 2 minutes between brewing, use less water, or try a
different brand of K-Cup
®
* pack.
Troubleshooting (cont.)
840225000 ENv03.indd 10840225000 ENv03.indd 10 12/11/12 11:09 AM12/11/12 11:09 AM