Filter
Top Products
5
How to Assemble
2
5 6
1
43
Place strainer bowl on top of the
motor base. Then place the
stainless steel strainer basket
inside the strainer bowl.
Raise the locking latches up to
lock into place.
BEFORE FIRST USE: After unpacking the juice extractor, remove
cardboard from filter basket and wash everything except the base in
warm, soapy water. Rinse and dry immediately. Never immerse the
base in water or other liquids; wipe it with a damp sponge.
Place the pulp container into
position by tilting the container
slightly.
Place a glass or other container under the juice spout. Slide the food
pusher down the feed chute by aligning the groove in the food pusher
with the small ridge on the inside of the top of the feed tube.
HINT:
To minimize cleanup, place
a plastic grocery bag in the pulp
container to collect the pulp. (See
page 6 for more information.)
With hands on outer edge, press
strainer basket down firmly to
latch into position.
Place the juicer cover over the
strainer bowl, positioning the
feed chute over the strainer
basket, and lower into position.
Strainer Basket
7
Small Ridge
Inside Feed
Chute
840148105 ENv01.indd 5840148105 ENv01.indd 5 9/23/13 2:19 PM9/23/13 2:19 PM