Filter
Top Products
7
4. Cut food to fit food chute. Pack food
chute tightly with food. Insert food
pusher in chute. Always use the
food pusher to feed food into the
chute. NEVER PUSH FOOD
THROUGH CHUTE WITH HANDS.
5. Plug in unit and process food.
6. Select speed. While pressing on
food pusher, push ON ( l ) or
PULSE to process food.
7. When food chute is empty, push
OFF ( O ) or release from PULSE
position. Wait until blade has
stopped rotating before removing
cover.
How to Operate the Controls
The control panel provides quick-
reference graphics which indicate
the correct blade or disc for a job:
Speed Switch: Push the switch to
either Low (•) or High (••) speed
before turning on the motor with the
control switch.
Control Switch: This switch gives you
three choices: ON ( l ), OFF ( O ) or
PULSE/MOMENTARY .
Selecting the ON ( l ) position will
cause the motor to run continuously
until you push the switch to OFF ( O ).
The PULSE/MOMENTARY position
will cause the motor to run only until
you release the switch; then it auto-
matically springs back to the OFF (O)
position.
Low
High
OFF
ON
Pulse/Momentary