Filter
Top Products
Microwave 87108 Use and Care Manual: Support: 1-800-488-5080 www.hb-microwaves.com
12
8. Two-stage cooking
To cook food at one power level, and then at a second power level immediately after:
1. Press “Time cooking/Power” twice and TEMO will say “Please select power level”.
Using the selector dial to select power level desired. TEMO will say “XX percent”.
2. Using selector dial user can select level. TEMO default level is 10, if selected it will say
“100 percent”. If different level is desired turn selector dial to select proper power level
and TEMO will say level chosen (“90 percent”, “80 percent”, …”10 percent”). LED
display will show power levels in the following format: PL10, PL 9, PL 8, PL 7, PL 6, PL 5, PL
4, PL 3, PL 2 and PL 1. Correct icon will flash while in use (high power or low power).
3. Press “Select” and TEMO will say “Please select minutes”. User can select minutes for
stage 1 cooking by turning selector dial.
4. Once desired minutes are entered press “Select” and TEMO will say “Please select
seconds”. User can select desired seconds for stage 1 cooking by turning selector dial. Do
not press “SELECT”.
5. Press “Time cooking/Power” twice for stage 2 cooking and TEMO will say “Please select
power level”. Using the selector dial select power level desired. See step 2 above.
6. Press “Select” and TEMO will say “Please select minutes”. User can select minutes for
stage 2 cooking by turning selector dial.
7. One-stage cooking
To cook food at only one power level:
1. User can select power level to use by pressing “Time Cooking/Power” button twice and
TEMO will say “Please select power level”.
2. Using the selector dial user can select level. TEMO default level is 10, if selected it will
say “100 percent.” If different level is desired turn selector dial to select proper power
level and TEMO will say level chosen (“90 percent”, “80 percent,… “10 percent”).
LED display will show power levels in the following format: PL10, PL 9, PL 8, PL 7, PL 6,
PL 5, PL 4, PL 3, PL 2, and PL 1. Correct icon will flash while in use (high power or low
power).
3. After power level is selected press “Select” and TEMO will say “Please select
minutes”. User can select minutes by turning selector dial . User can choose 1 through
30 minutes in increments of 1 minute. Minutes 35 to 95 can be chosen in increments of 5
minutes.
4. Once desired minutes are entered press “Select” and TEMO will say “Please select
seconds”. User can select seconds by turning selector dial . Press “Start” once desired
seconds are entered.
5. TEMO will say “Cooking started” when “Start” is pressed. When cooking is completed
TEMO will say “Cooking finished”.