13
9. Express Cook
Buttons 1-5 on the control panel are for express cooking. To cook food at 100% power
with the touch of a button, press “1” for one minute, “2” for 2 minutes, and so on up until
“5” for 5 minutes.
TEMO will say “One minutes express cook” if 1 is pressed, “Two minutes express
cook” if 2 is pressed, “Three minutes express cook” if 3 is pressed, “Four minutes
express cook” if 4 is pressed and “Five minutes express cook” if 5 is pressed.
10. +30 SEC
The “+30 SEC” button can be used to set the time for cooking or for adding on time while
food is already cooking. To set the time for cooking, press “+30 SEC” button repeatedly to
increase the time to your desired cooking time. Press “+30 SEC” button during cooking to
increase the cooking time by 30 seconds. TEMO will say “30 seconds added” every time
it is entered. The maximum amount of time that can be added is 95 minutes.
11. Defrost by Weight Function
1) Press “Defrost by W.T./By Time” button once TEMO will say “Defrost by weight,
please select weight”.
2) Using the selector dial enter the weight in ounces (4-100 oz). Press “Start/+30
Sec/Select” and TEMO will say “Defrost started”.
3) When defrost time elapses TEMO will say “Defrost finished”.
Microwave 87108 Use and Care Manual: Support: 1-800-488-5080 www.hb-microwaves.com
12. Time Defrost Function
1) Press “Defrost by W.T./By Time” button twice to defrost by time. TEMO will say
“Defrost by time, please select minutes”, using the selector dial enter desired
minutes. Minutes 1 through 30 can be chosen in increments of 1 minute. Minutes 35 to
95 can be chosen in increments of 5 minutes. Once desired minutes are entered push
“Select” and TEMO will say “Please select seconds”. Select desired seconds by
turning selector.
2) Press “Start” once seconds are entered, TEMO will say “Defrost started”. Once
time has elapsed TEMO will say “Defrost finished”.
7. Once desired minutes are entered press “Select” and TEMO will say “Please select
seconds”. User can select desired seconds for stage 2 cooking by turning selector dial.
8. Press “Start” and TEMO will say “Cooking started”. Once cooking is finished TEMO
will say “Cooking finished”. You will hear a beep sound when stage 1 finishes and
stage 2 begins.