Filter
Top Products
Page 4SKU 90262
Note: Performance of this product may vary depending on variations in local line voltage or
tool battery power. Extension cord usage may also affect product performance.
Warning: The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be under-
stood by the operator that common sense and caution are factors which cannot be
built into this product, but must be supplied by the operator.
Unpacking
When unpacking, check to make sure the parts listed on page 7 are included. If any parts
are missing or broken, please call Harbor Freight Tools at the number on the cover of this
manual as soon as possible.
Caution: To avoid health hazards: Clean all
un-assembled parts in the dishwasher. Never
wash the Grinder Drive Unit (1) in the dishwasher. Before assembling, thorougly wipe off
the Meat Grinder Drive Unit (1) parts with a damp rag and antibacterial soap, making sure to
keep moisture away from the motor housing and power cord. After assembly, test the Meat
Grinder by running several slices of day old bread through the machine to insure that all parts
are working properly. After each use, clean the Meat Grinder thoroughly. Do not
submerge the electrical machinery in the water. Detach parts and wash in mild
antibacterial detergent and warm water. Dry parts and re-assemble when ready to use.
FIGURE 1
FIGURE 2
Star Cutter (8)
Fine Grill (10)
Sausage Maker (14)
Spiral Drive (7)
Cutting Edge
Sausage Maker (15)
Sausage Stuffer (14)
attached to unit - held in
by threaded Nut (12).
REV 05/04 REV 03/05
Course Grill (11) - not shown