Filter
Top Products
Page 2SKU 92960 For technical questions, please call 1-800-444-3353
Specifications
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions, operating and
maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice
number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future
reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or tools in damp or wet
locations. Don’t expose to rain. Keep work area well lit. Do not work with flammable
gasses or liquids near heat sources of any kind. Do not operate power tools in close
proximity to the Oil Gun.
3. Keep children away. Children must never be allowed in the work area. Do not let
them handle the Oil Gun.
4. Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5. Use the right tool for the job. Do not attempt to force a small tool or attachment to
do the work of a larger industrial tool. There are certain applications for which this tool
was designed. It will do the job better and more safely at the rate for which it was
intended. Do not modify this tool and do not use this tool for a purpose for which it
was not intended.
6. Dress properly. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically non-conductive clothes and non-skid footwear
are recommended when working. Wear restrictive hair covering to contain long hair.
Wear heavy work gloves during operation.
7. Use eye protection. Always wear ANSI approved impact safety goggles. Wear an
ANSI approved dust mask or respirator when working around metal, wood, and
chemical dusts and mists.
8. Do not overreach. Keep proper footing and balance at all times.
Maximum Operating Pressure 750 PSI
Flow Rate (Maximum) 9.2 Gallons per Minute
Working Temperature 14
o
to 120
o
F.
Fluid Inlet 1/2” - 14 NPT
Viscosity 8 - 5000 mPas (MilliPascal sec.)
Fluid Range 1-35 LPM / .3 - 9.2 GPM
Weight 1.70 Lbs.
NOT FOR COMMERCIAL USE
Note: A separate oil pump (not included) is required for use with this Oil Gun. This separate oil pump must
supply less than 750 PSI. This pump must be designed for continuous use with the ability to withstand a
stoppage of oil flow when the Oil Gun Handle is released.