Filter
Top Products
SKU 94519 For technical questions please call 1-800-444-3353 Page 2
Specifications
Construction
2 Solar Panels with Mounting Bracket,
Controller and Exhaust Fan.
Output 12 VDC 12 Watts 800 - 1000 mA
Exhaust Fan
6-¾” Dia. x 2” Thick
3350 RPM. 251 CFM
Voltage
Regulator
Over discharge protection less than 10.5 V
Over charge protection over 14.5 V
LED Indicator
Red indicates “Charging”, Green indicates
“Operating”
Fuse 3 Amp push in fuse
Dimensions 12-½” W x 36-½” L x 1” D each panel Weight 28.5 lb. Panel Only: 9.3 lb.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be fol-
lowed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or power tools in
damp or wet locations. Don’t expose Control Unit to rain. Keep work area
well lit. Do not use electrically powered tools in the presence of flammable
gases or liquids.
3. Keep children away. Children must never be allowed in the work area. Do
not let them handle machines, tools, or extension cords.
4. Store idle equipment. When not in use, tools must be stored in a dry
location to inhibit rust. Always lock up tools and keep out of reach of
children.
5. Use the right tool for the job. Do not attempt to force a small tool or
attachment to do the work of a larger industrial tool. There are certain
applications for which this tool was designed. It will do the job better
and more safely at the rate for which it was intended. Do not modify this
tool and do not use this tool for a purpose for which it was not intended.
6. Dress properly. Do not wear loose clothing or jewelry as they can be
caught in moving parts. Protective, electrically non-conductive clothes and
non-skid footwear are recommended when working. Wear restrictive hair
covering to contain long hair.