Filter
Top Products
SKU 94519 For technical questions please call 1-800-444-3353 Page 5
Assembly and Operation
These solar panels produce electricity when in the presence of sunlight. The
amount of electricity produced increases as the sunlight becomes stronger. Less
power is produced in less sunlight, but these panels will generate electricity even
on cloudy days.
The enclosed mounting frame is designed to hold the solar panels at an angle to
increase the amount of surface directly facing the sun. Adjust the position of the
mounting frame to maximize exposure to sunlight.
These solar panels are designed to power an exhaust fan, which is ideal for green
houses, sheds, boats or house vents.
Assemble the solar panel frame.
1. Press the Left and Right Triangle
Frames into slots 1 and 3 on both
ends of the Top Link Bar and Bottom
Link bar, as shown in the diagram.
2. Push the Top Link Bar down to Slot 2
to lock the frame assembly.
3. Position the assembled frame in a
location that the Solar Panels will
directly face the Sun. The assembly
should face the South for maximum
exposure and have no obstructions in
front of it. The mounting surface must
be level, well constructed and capable
of supporting the frame assembly and
Solar Panels. The location should
be out of the way of passersby and
protected from damage.
4. Secure the frame assembly using
hardware (not supplied) through the
four holes in the bottom of the Left and
Right Triangle Frames.
5. Carefully place each Solar Panel on
the front of the frame assembly, so
the bottom of each Solar Panel fits into the slot of the bottom of the frame
assembly.
6. Lock the two eye hooks on the backs of the Solar Panels to the bolts on the
Top Link Bar to secure the Solar Panels in place.