Heatcraft Refrigeration Products SWN0310M6G Refrigerator User Manual


 
4
Standard Features & Factory Installed Options
Dual pressure switch
Oil separator with discharge check valve
and oil return hand valve
Compressor and control circuit breaker
Two tier rack
Suction accumulator
Sealed suction filter
Replaceable core suction filter (0300-2200)
Replaceable core liquid filter (0300-2200)
Liquid line solenoid valve
Spring mounted compressors with suction
and discharge vibration eliminators (models
0075 to 0400)
Factory Installed Options
Water regulating valve (shipped loose)
Crankcase heater
Air defrost timer
Electric defrost kit. Kit includes timer,
evaporator fan contactor, defrost heater
contactor(s), lockout relay and terminal block
Remote load fusing for electric defrost kit.
Includes evaporator fan motor and defrost
heater fuses
Beacon II
compatible (contact factory)
Demand cooling for low temperature R-22
(contact factory)
The indoor SWN water-cooled condensing unit is specifically designed for use in supermarket, restaurant,
warehouse and other commercial and industrial applications. The design focuses on ease of installation
and maintenance along with the flexibility to fit most application requirements.
Standard Features
Fixed low pressure switch (adjustable on low temp models)
Fixed high pressure switch
Pump down switch
Compressor contactor and control circuit fusing
230V control circuit transformer on 460V units
Removeable electrical box provides convenient front access to the oil pump and compressor
Standard 16-3/4” tall box - (large 29-1/4” tall box is standard when defrost components are selected)
Sealed liquid line filter drier and sight glass
Oil pressure switch (when required)
Shell and tube condenser with outlet shut-off valve, charging port and pressure relief device
Solid mounted compressors (models up to 0400)
Spring mounted compressors with suction and discharge vibration eliminators (models 0499
and above)
Compressor head cooling fan (when required)
Compressor solid state protection model (on units with 4D compressors)
N.Y. MEA