Filter
Top Products
THE EDGE
™
SLICER
F-39956 – The Edge
™
Slicer Page 3 of 4
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
SPECIFICATIONS
KNIFE MOTOR:
1
⁄3 H.P., permanently lubricated ball
bearings. Single phase capacitor-start, induction run.
3.5 AMP
GAUGE PLATE INTERLOCK: Gauge plate interlock
protects knife edge when indicator is closed.
CARRIAGE SYSTEM INTERLOCK: Carriage will not
remove if gauge plate not closed.
REMOVABLE CARRIAGE SYSTEM: Positive angle
carriage design enables operator to slice without
manual feed. The anodized aluminum carriage
system is removable for thorough cleaning and
sanitation procedures. The carriage has 9
3
⁄4" manual
travel.
CONTOURED CARBON STEEL KNIFE: Carbon
steel, 11
3
⁄4" diameter with sanitary hub. Knife is
protected by a permanently mounted ring guard.
The anodized aluminum knife cover provides easy
access for cleaning. Gauge plate protects knife edge
when indicator is closed.
TOP MOUNTED BORAZON STONE SHARPENER:
One lever operation utilizing two Borazon stones to
sharpen and hone in five seconds. Removable and
top mounted. When sharpener is removed for
cleaning, knife edge is shielded.
POLY V-BELT DRIVE SYSTEM: Knife is driven by
a Poly V belt and runs at 370 rpm for optimal
performance. Aluminum knife shaft pulley and steel
motor pulley.
SANITARY ANODIZED ALUMINUM BASE:
One-piece base protects against possible growth
of bacteria. All surfaces are durable and smooth,
presenting no holes or crevices in which food can
lodge. Easy clean-up and durable finish to withstand
harsh cleaning products.
PERMANENTLY MOUNTED RING GUARD:
Permanently mounted ring guard with integrated
product deflector protects knife during operation and
cleaning.
CLEANING LEG: Cleaning leg supports the slicer in
tilted position for cleaning beneath the machine.
REMOVABLE REAR DEFLECTOR: No tools are
required for removal of the deflector for thorough
cleaning of the slicer.
FINISH: Anodized aluminum carriage, gauge plate,
knife cover and base.
MEAT GRIP: Rear mounted grip is anodized
aluminum. Swings out of way when not in use.
ELECTRICAL SPECIFICATIONS: 120/60/1 –
UL Listed.
SWITCH: Moisture protected toggle type.
CORD & PLUG: 6-foot, three-wire power supply
cord and plug.
CAPACITY: The carriage will take food up to 7
1
⁄4" in
width or 7
3
⁄4" in diameter.
GAUGE PLATE: Gauge plate is a heavy anodized
aluminum casting with ribbed face for smooth
feeding. Adjustable to cut any thickness of slice up
to
5
⁄8".
WARRANTY: All parts and service coverage for one
year including knife.
WEIGHT: Shipping 83 lbs., Net 63 lbs.