701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
F-40297 – CLCS86eR Dishwasher Page 3 of 12
CLCS86eR
DISHWASHER
CLCS86eR
Machine Ratings (Mechanical)
Racks per hour (19
3
⁄4" x 19
3
⁄4") 342
Conveyor Speed - feet per minute 9.5 max.
Dishes per Hour (Average 25 per rack) 8,550
Glasses per Hour (Average 45 per rack) 15,390
Floor Space – Table to Table (Inches) 86
Overall Dimensions – H x W x D (Inches) 79
9
⁄16 x 99
3
⁄4
x 31
1
⁄4
Motor H.P. Power Scrapper 2
Wash 2 – Rinse 2
Conveyor Drive H.P.
1
⁄6
Number of Tanks 3
Tank Capacity – Gallons Power Scrapper 23
Wash 23 – Rinse 22
Pump Capacity –
Gallons per Minute - Weir Test Combined 435
Heating Equipment –
(For keeping wash/power rinse hot)
Gas Burners (with Natural Gas/LP)
156,000 BTU per hr.
(2 - 78,000)
Electric Heating Unit – Size Used Regulated 25 KW (15-10)
Booster Heater / Final Rinse 30 KW
Rinse – Minutes operated during hour of
maximum operation 60
Final Rinse Flow – Gals. per min.
At 15 PSI Flow Pressure 1.89
At 20 PSI Flow Pressure 2.2
Final Rinse Flow – Gals. per hr. – MAXIMUM
At 15 PSI Flow Pressure 114
At 20 PSI Flow Pressure 132
Rinse 20 PSI Flow Pressure
Gal./Rack
Hot Water Sanitizing
.39 - 180°F
Steam Consumption –
Pounds per hr. - MAXIMUM
Approx. 30 lbs. per hr. = 1 boiler H.P. (BHP)
Dishwasher, based on 20 PSI steam and
on customer supplying final rinse water
at 180°F maximum 130
Steam Booster, if used on 20 PSI steam -
20 PSI water flowing - 130°F entering
water raised to 180°F min. 63
Exhaust Requirements –
Cubic Feet per minute
Entrance End 200
Discharge End 175
Peak Rate of Drain Flow – Gallons per minute.
(Initial rate with full tank) 38
Shipping Weight Crated – Approximate lbs. 1127
AVAILABLE OPTIONS AND ACCESSORIES . . .
Flexibility is synonymous with Hobart CLeR dish-
wash ers. If your operation demands a dishwasher
with a vent hood, an extended hood . . . a power
scrapper, just specify the combination of options that
suit your needs.
OTHER AVAILABLE ACCESSORIES . . .
Blower-dryer, direct drive unloader.
OTHER STANDARD FEATURES . . .
•Thermal Layer Curtains help keep the heat inside
the machine.
•Ball Detent Clutch Conveyor Drive for maximum
protection against conveyor jams
•Integrated Removable Pump Intake Screen to
offer the ultimate guard of keeping debris from
entering the pump.
•Hinged Door Seals and stainless steel labyrinth
seal for drip-free operation
•Door Actuated Drain Closure. Closing the door
automatically actuates drain closure, eliminates
extra manual steps, ensures that closure is in the
correct position.
DDU38
e
Direct Drive Unloader. Center pawl to be
connected to dishwasher conveyor by means of a
stainless steel adjustable rod. As conveyor drives,
center pawl drives racks around 90 degree corner.
The DDU38e is designed to move the racks at the
same speed as the conveyor dishwasher speed.
The DDU38e adds 38" to the length of the machine.