Hobart FT1000-ER-BD Dishwasher User Manual


  Open as PDF
of 44
 
– 41 –
This may cause the dish limit arm to trip and stop the conveyor movement. If the
conveyor stops for any reason during the 20 minute calibration period, the procedure
should be rerun from the beginning to ensure proper calibration.
After20minutes, unblockthephotodetector.Whenthenalrinse outputturns
offandthedisplayshows“---“forthenalrinsetemperature,stoptheconveyor.
Power off the machine by pressing the POWER button on the keypad. This saves
the calibration data and completes the automatic calibration.
Conveyor Gear Motor
The conveyor gear motor is shipped with oil at the proper level in the speed reducer.
LubricantsareavailablefromyourlocalHobartServiceOfce.
Delime Indicator Setup
Basedonwaterhardnessandnalrinsewaterusage,themachinewillcalculate
and notify the operator when it is time to delime. Refer to FT1000 Operation manual
(F-47504) or FT1000 Service Manual (F-45518) to program the ‘Delime-Water
Hardness’and‘DelimeConcentration’settingsbasedoncustomer’sspecicwater
conditions and delime solution being used.
SERVICE
Ifserviceisneededonthismachine,contactyourlocalHobartServiceOfce.
 previous next