– 16 –
SERVICE
If service is needed on this equipment, contact your local Hobart Service Office.
FORM 18812 Rev. B (12-99) PRINTED IN U.S.A.
TROUBLESHOOTING
SYMPTOMS POSSIBLE CAUSES
Mixer will not start. 1. Gear shift lever between gears (not fully engaged).
2. Circuit protector in open position — check fuse or
disconnect switch.
3. Mixer or attachment overloaded.
4. Bowl not all the way up.
5. Wire Cage Assembly is not in the front-center
position.
Agitator touches bowl. 1. Bowl clamp(s) not closed.
2. Improper agitator clearance — see MAINTENANCE
for adjustment procedure.
3. Bowl clamp(s) improperly adjusted — see
MAINTENANCE for adjustment procedure.
Planetary seal squeaks. 1. Seal requires occasional lubrication — see
MAINTENANCE.