Filter
Top Products
– 9 –
INSTALLATION
Before installing the fryer, verify that the type of gas (natural or propane) agrees with the specifications
on the fryer data plate, which is located on the inside of the door panel. Ensure the fryer is configured
for the proper elevation.
Record your fryer model, device and serial numbers for future reference in the space provided below.
This information can be found on the fryer data plate.
Fryer Model No. ____________________
Device ____________________
Serial No. ____________________
UNPACKING
This fryer was carefully inspected before leaving the factory. The transportation company assumes full
responsibility for safe delivery upon acceptance of the shipment.
Immediately after unpacking the fryer, check for possible shipping damage. If the fryer is damaged,
save the packaging material and contact the carrier within 15 days of delivery.
Accessories packed in the fry tank include:
• Crumb Screen
• Basket Hanger
• Legs (4)
• Drain Pipe
• Twin Fry Baskets (2)
Do not use the door or its handle to lift the fryer.