— 14 —
PL-41125-1
GAS COMBINATION
CONTROL VALVE
BEFORE FIRST USE
1. Clean the protective metal oils from all surfaces of the oven.
2. Use a non-corrosive, grease dissolving commercial cleaner. Follow manufacturer's directions.
3. Rinse thoroughly with a clean damp cloth and wipe dry with a soft clean cloth.
• DO NOT hose down the oven.
• Do not use this oven if its controls have been wet. If the controls are wet, contact your Hobart
servicer.
LIGHTING INSTRUCTIONS
Turning the Oven On
The burner control is a solid state device that automatically ignites and monitors the pilot flame.
To turn the oven on:
1. Turn the gas combination valve (Fig. 5) to ON.
2. Push the Power Switch to ON.
3. Set the oven temperature to desired temperature.
Fig. 5
If the burner fails to light within 90 seconds:
• The burner control will shut off the gas combination valve and will lock out.
• To reset the burner control for restart, press the Power Switch to OFF and then to ON.
If the burner still fails to light:
• Turn the oven off.
• Wait 5 minutes before restarting.
If lockout occurs again, contact your local Hobart authorized servicer.
Turning the Oven Off
Turn Power Switch to OFF.