Filter
Top Products
– 10 –
BY TEMPERATURE
TYPE: SOFT CHILL
↓TARGET TEMP: 37
°F↑
MAIN START
BY TEMPERATURE
TYPE: FREEZE
↓TARGET TEMP: 0
°F↑
MAIN START
MAIN MENU
BY TEMP —
Chill Cycle is complete when any (or all) product probe(s) reaches the Target Temp.
From the Main Menu, select BY TEMP.
• Select the Type: CHILL, SOFT CHILL or FREEZE*.
SEIRESPMETYB
TESERPYROTCAF
PMETTEGRAT
EGNAR
FCQH,CQHLLIHC73°F 04OT33°**F
FCQH,CQHLLIHCTFOS73°F 04OT33°**F
FCQHEZEERF0°F 82ot22–°F
55otdednetxeebnacegnaR**°F .62egapees—derisedfirosivrepusyb
• To adjust the TARGET TEMP: Press ↓ or ↑.
• Insert probes in product — smart probes sense
temperature of product and are automatically selected.
• Close the door.
• To begin Chilling, select START.
(MAIN returns to the Main Menu.)
• To add more product while chilling: Open door; insert
probe in product; close door; press ADD/REMOVE.
• If any probes are
OFF
, select the desired probe(s).
• Press CONTINUE.
• The chill time displays in the lower left corner —
Hr: Min: Sec.
☛ A probe has reached the target temperature.
• Press MUTE or select the ‘done’ probe’s number to
silence the buzzer.
(This step is repeated as each probe reaches the
target temperature; see next page.)
* Some chill types are not available
on all models.
BY TEMPERATURE
TYPE: CHILL
↓TARGET TEMP: 37
°F↑
MAIN START
SELECT PROBE:
1 159°F 3
2 154°F
0:00:07 CONTINUE
CHILLING AIR: 14°F
1 159
°F 156°F 3
2 154°F
0:00:19 ADD/REMOVE
CHILLING AIR: 14°F
1 41°F DONE 3
2 44°F
1:16:01 MUTE
MAIN MENU 08:05:01
BY TEMP BY PROD
BY TIME
MORE
MAIN MENU 08:06:01
HOLD PROD PRINT
DEFROST SETUP
BACK
CHILLING AIR: 14°F
1 159
°F 3
2 154°F
0:00:03 ADD/REMOVE
❄