Filter
Top Products
– 17 –
Operating Models LX40H & LX40C (Continued)
DO THIS DISPLAY SHOWS REMARKS
Open door; slide rack of READY.
dishes into dishwasher.
Close door.
Press WASH. WASH lit and sump Machine initiates a wash and rinse cycle.
(Before you press WASH, temperature displayed
you can change the cycle during wash cycle. If door is opened during wash cycle, cycle
selection if desired. See will restart from beginning when door is
READY MODE below.) closed.
RINSE lit and incoming
If door is opened during drain or rinse cycle,
water temperature cycle will continue at point where door was
displayed during rinse opened upon closing door.
cycle.
If OFF is pressed during the wash/rinse
cycle, the machine will drain and shut down.
When cycle is complete, READY. Machine will drain and shut down if the
reload machine for next programmed idle shutdown time is reached.
wash/rinse cycle, or, if
not in use, machine will
maintain READY mode.
At end of day, press OFF. Display shut down. When OFF is pressed, machine will
drain and shut down.
Ready Mode
When the dishwasher is in the READY mode (a cycle is not running), the selected cycle (LIGHT,
NORMAL, HEAVY) is illuminated. If the cycle selection is not locked, you can change the selection
by pressing CYCLE until the desired cycle is lit. If cycle selection is locked, there will be no response
when CYCLE is pressed.