Filter
Top Products
— 4 —
HF Series Fryer — Construction Features
Model Filter Ready
Battery Battery
Configuration Interplumbing
HFD40/HFC40 Opt. (Use HMF50) Opt. Opt.
HFD50/HFC50 Opt. (Use HMF50) Opt. Opt.
HFD225 Opt. (Use HMF50) Opt. Opt.
HFD85/HFC85 Opt. (Use HMF85) Opt. Opt.
Model
Fat Melt
Thermostat Basket Lift(s)
Basket(s)
Cycle Twin Single Tri
HFD 225 Std. N/A N/A
HFD40, HFD50 Std. Solid State Opt. Std. Opt. N/A
HFD85 Std. Opt. Opt.
HFC40, HFC50
Std. Computer Opt.
Std. Opt. N/A
HFC85 Std. Opt. Opt.
HF Series Fryer — Features
BATTERY CONFIGURATIONS
Batteries of up to five fryers wide can be configured with any HF Series Fryer or HFO Frymate Dump
Station (either 15
1
⁄2" [39.3 cm] or 21" [53.3 cm] wide). Possible configurations showing positions A thru
E are depicted below:
NOTES:
= Dump Station; = Fryer.
*Indicates filter interplumbing not available.
A mobile filter can be located under any position in a battery if it has been built without an HFO Frymate.
A mobile filter can be located under any position in a battery if the line-up has been built with an HFO Frymate
located at either end of the battery.
When an HFO Frymate is built between two fryers within a battery, the filter is located under the HFO Frymate.
All options and accessories can be used with batteried equipment.
HFO15 is used on Models HF40 or HF50.
HFO21 is used on Model HF85.