Filter
Top Products
— 19 —
DURING SLACK PERIODS
If the fryer is not going to be used for an extended period, oil life is enhanced by pressing IDLE if
SETBACK is enabled. With the setback feature enabled, after 30 minutes of non-use, the fryer automatically
assumes Idle mode where it maintains 275°F (135°C) temperature. If Setback is disabled, the fryer
does not automatically go into idle mode and will continue to maintain 350°F (176°C).
IDLE MODE
If setback is enabled, during idle mode, the Setback temperature of 275°F (135°C) will be maintained until
IDLE is pressed.
IDLE MODE WITH SETBACK - PRESS IDLE TO RESUME
If the setback is not enabled, 350°F (176°C) is maintained during Idle mode.
▲▼
▲
▲
▲
▲
IDLE MODE - PRESS IDLE TO RESUME
The purpose of the setback temperature is to extend oil life during slack periods.
OPERATOR ADVICE
OIL indicates the programmed number of hours has expired and reminds the operator that the oil should
be changed or filtered. To remove the advice, reset the timer to a non-zero value. A zero setting turns the
oil timer off.
TOO HI or TOO LOW indicate invalid edit entry.
USING THE EDITOR
Names or Messages use the 12 character alpha-display. When entering data …
▲
begins at A and increments thru the alphabet.
▼
begins with Z. Select the correct letter.
moves Right one character or space.
moves Left one character or space.
Use a series of to display the name or message you want.
Time or Temperature …
▲▼
increment up or down (0 - 9). Select the correct number. moves Right one space; moves
Left.
°F or °C …
▲▼
toggle between Fahrenheit and Celsius; temperature is automatically converted. All temperatures
display in the most recently edited temperature scale.
PROGRAMMING THE CONTROLLER
Enter the menu system by pressing Product Pads 2 and 3 at the same time until -FUNCTIONS- is
displayed. The controller must not be in a timed product cycle to enter the menu system.
Step through the program using
▼
. If you go too far,
▲
will return one step.
EDIT PRODUCT RECOVERY
SEL SETBACK SELECT MELT
CALIBRATE MANUAL SETUP
BOIL OUT OIL TIMER
Description of each program element follows.
▲
▲