Filter
Top Products
– 4 –
ELECTRICAL CONNECTION
WARNING: ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH APPLICABLE
PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL ELECTRICAL CODES.
WARNING: DISCONNECT THE ELECTRICAL POWER SUPPLY AND PLACE A TAG AT THE
DISCONNECT SWITCH INDICATING THAT YOU ARE WORKING ON THE CIRCUIT.
When no power cord and plug is provided on the machine, connect the electrical power supply to the
leads in the junction compartment (Fig. 1). The compartment is provided with a tapped hole for 1" trade
size conduit. Refer to the machine data plate (Fig. 3).
Machines ordered with casters are provided with a cord and plug and only require connection to an
appropriately sized, grounding-type receptacle. Refer to the machine data plate (Fig. 3) and Electrical
Data, below.
ATADLACIRTCELE
ledoMesahP/ztreH/stloV
tiucriC,elcatpeceR
eziSgulPdna
dnaelcatpeceR
epyTgulP
ecnerefeR
2534
3/06/002spmA03
nwohSelcatpeceR
AMEN
R03-12L:elcatpeceR
P03-12L:gulP
3/06/032spmA03
nwohSelcatpeceR
AMEN
R03-51L:elcatpeceR
P03-51L:gulP
3/06/064spmA02
nwohSelcatpeceR
AMEN
R02-61L:elcatpeceR
P02-61L:gulP
.noitidE3991,07APFN/ISNA,edoClacirtcelElanoitaNehthtiwecnadroccanidelipmoC
CHECK MOTOR ROTATION
With the grinder attachment in place and the hopper guard closed, check worm rotation before making
a permanent electrical connection by first pushing the MIX-GRIND switch and then pushing the STOP
switch (Fig. 2).
If there is no worm rotation but the mixer arm turns, correct the rotation using the following procedure:
DISCONNECT THE ELECTRICAL POWER SUPPLY and interchange any two of the incoming power
supply leads. Reconnect the power supply and push the
MIX-GRIND switch to verify that both the worm
and the mixer arm rotate.
CONTROL BOX HEATER
The Mixer-Grinder has a heater in the control box to keep the controls dry. It is automatically ON when
the machine is electrically connected. The Mixer-Grinder should always be connected EXCEPT when
performing assembly, disassembly, cleaning, or maintenance of the machine. After cleaning,
reconnect the electrical power supply.
G
Y
Z
X
G
Z
Y
X
G
Y
W
Z
X