Hobart ML-134354 Mixer User Manual


 
– 11 –
POWER BOWL LIFT
CAUTION: Before lowering the bowl onto a bowl truck, always unlock bowl and swing bowl out
slightly.
To raise the bowl, the bowl must be in the locked position. Push and hold the up arrow on the bowl switch.
To lower the bowl, push and hold the down arrow on the bowl switch.
To Raise the Bowl While Mixing
To raise the bowl while the agitator is mixing the product (when required by recipe or when using the Bowl
Scraper Attachment):
1. Close the wire cage, then select a mixing speed on the SPEED dial.
2. Select a count-down time or HOLD for continuous count-up mixing.
3. While pressing and holding the up arrow on the bowl switch, press and hold the START button.
The mixer runs only in stir speed while the bowl is rising.
4. When the bowl reaches the mix position, release the START button. The mixer automatically
changes to the selected mixing speed.
NOTE: Mixing speed and time can be adjusted any time during the mixing operation without
stopping the mixer.
Fig. 8