Filter
Top Products
3 - 5
HHP_30_FRAMES_PER_SEC=30
System (MPU) Clock Speeds
Note: CPU clock speed must always be greater than system clock speed.
POWER_SYS_SPEED_96MHZ=0,
POWER_SYS_SPEED_48MHZ,
POWER_SYS_SPEED_32MHZ
Beeper Volume Enum
BEEP_OFF=0, Don’t sound beeper – no volume.
BEEP_LOW=1, Low volume.
BEEP_MEDIUM=2, Medium volume.
BEEP_HIGH=3 Loudest volume.
Decoder Mode Enum
DECODE_METHOD_STANDARD=0, Normal decode mode (default).
DECODE_METHOD_QUICK_OMNI Fast omni directional decoder .
DECODE_METHOD_NONOMNI_ALD Non-omni advanced linear decoder.
DECODE_METHOD_OMNI_LINEAR Omni-directional linear decoder.
Configuration Structure Item Enum for hhpReadConfigItem() and
hhpWriteConfigItem()
BEEPER_CONFIG=0, Read/Write HHP_BEEPER items.
TRIGGER_CONFIG, Read/Write HHP_TRIGGER_CONFIG items.
DECODER_CONFIG, Read/Write HHP_DECODER_CONFIG items.
POWER_CONFIG, Read/Write HHP_POWER_SETTINGS items.
VERSION_INFO, Read/Write HHP_VERSION_INFO items.
SYMBOLOGY_CONFIG,
Read/Write HHP_SYM_CONFIG items. If specified in
hhpReadConfigItem(), all the symbology config items for all the
symbologies will be retrieved. Use hhpReadSymbologyConfig()
to specify individual symbology structures.
SERIAL_PORT_CONFIG, Read/Write HHP_SERIAL_PORT_CONFIG items.
IMAGE_ACQUISITION, Read/Write HHP_IMAGE_ACQUISITION items.
IMAGE_TRANSFER, Read/Write HHP_IMAGE_TRANSFER items.
SEQUENCE_CONFIG Read/Write SEQUENCE_CONFIG items.
ALL_CONFIG
Read/Write HHP_CONFIG items from structure memory in all
HHP configuration member structures.