Filter
Top Products
7
TURNING ON THE POWER
Unpack the power cord from the back of the wine chiller. Plug the chiller into a suitable
120V three prong power outlet. The chiller will immediately start running and the
interior light will initially turn on.
When placing both white and red wine into the chiller, please keep in mind that the
bottom of the chiller is the coolest area and the top of the chiller is the warmest area.
There is a sliding shelf/basket in the bottom of the chiller. This can be used for wine
bottles or other beverages, such as soda/beer cans or juice containers.
NOTE: WHEN USING THE RACKS, CAREFULLY PULL OUT THE RACKS AS THEY
SLIDE EASILY IN AND OUT.
Allow the wine chiller to cool for up to 1 – 2 hours before loading. After three hours of
cooling the chiller will reach an approximate temperature of 55°F (13°C) degrees.
PLACING WINE IN THE CHILLER
SETTING UP THE WINE CHILLER
ADJUSTING THE LEG OF THE CHILLER
The wine chiller has an adjustable leg on the front of the unit
and under the door hinge. This leg can be used to adjust the
height and stabilize the unit. To lengthen the leg turn the leg
counter-clockwise and to shorten the leg turn clockwise.
ADJUSTABLE LEG
INTERIOR LIGHT
The interior light source of the wine chiller consists of LED lighting which is long lasting
and energy efficient. LED lights will usually last for many years. It is not replaceable.
By pressing the “light bulb” button on the control
panel, the interior light can be turned ON and OFF.
The light will automatically turn OFF if the light
remains ON for 15 minutes.
Interior Light Button