Filter
Top Products
Manning EC-P2 Sensor 19546 ECP2 07/09 REVG Copyright © 2009 Honeywell Analytics. All Rights Reserved. 6
1 System Description continued
System Specifications
Primary Power: Alkaline C cell battery, 48 hours
operation. Note: An audible alarm single beep every
60 seconds indicates that either the Alkaline C cell
battery is low or the internal rechargeable NiCad
battery is low.
Standby Power: Internal rechargeable NiCad
battery, 6 hours operation. Note: An audible alarm
single beep every 60 seconds indicates that either
the Alkaline C cell battery is low or the internal
rechargeable NiCad battery is low.
Charger: 120 VAC plug-in charger for internal
standby battery
Display: Backlit LCD
Pump: Miniature internal diaphragm type,
flowrate 0.5 SCFH
Alarms: Two concentration alarms, zero drift
caution, Low flow and Low battery alarms. Alarms
displayed on LCD and indicated by audible beeper.
Standard Accessories: Storage case, 10" extension
wand, battery charger, filter material, datalogging
software, RS-232 output cable (DB9 connector)
Optional Accessories: Analog output cable. Sensor
Keeper for storage of additional SMART-CELLs
Sensor Type: Target gas selective electrochemical
SMART-CELL
Accuracy: Sensor dependant but generally ± 5% of
reading
Repeatability: ± 1% full scale
Operating Ambient Temperature Range: 0
o
to
+120
o
F
Storage Temperature: Recommend storing on the
charger in an air conditioned office
Weight: 3 lbs. (shipping weight), 1.8 lbs. (detector
only)
Dimensions: Approx 3.5" x 5" x 8.5"
Outputs: RS-232 output of stored gas values.
Analog output 0 to 1.0 VDC (requires optional analog
output cable)
Memory: 12,000 data points, storage interval
between points programmable at 1, 5, 10, or 15
minutes. Typical capacity: 8 days at 1 minute storage
interval