Filter
Top Products
Clearing alarm:
Press the key.
All alarm messages, with the exception of AL2, are also reset by
switching off the operating voltage. AL2 can only be reset using
the key.
10 Problem solving
Fault Cause Remedy
Evaporator fan does not Evaporator Refit
switch on during sensor T2 has sensor.
cooling when the fallen out of
programmed setting the fins.
of parameter E11
is set to position 3
(fan run-on).
For PCR-300RC only: Back-up battery Switch on
The real-time clock is switched off. back-up
stops or indicates the battery
wrong time in the event see
of a power failure. Section 5.3.
11 Warranty conditions
¼ Warranty is provided for a period of 12 months, starting at the
date the item was delivered. Proof of this should be furnished in
the form of a delivery note or invoice.
¼ All functional faults caused by poor workmanship or faulty
materials will be repaired free of charge during the warranty
period.
¼ More extensive claims, in particular for consequential damage, are
excluded
¼ Damage or malfunctioning caused by the equipment
being handled incorrectly or by non-compliance with the operating
instructions shall not be covered by the warranty.
The warranty shall be invalidated if any work is carried out
on the appliance.
17