Filter
Top Products
7
CHANGING THE LED LIGHT
CARE AND MAINTENANCE
Note: All parts removed must be saved to do the replacement of the LED light.
Before removing the LED light, either unplug the refrigerator or disconnect
the electricity leading into the refrigerator at the main power supply. Failure
to do so could result in electrical shock or personal injury.
You should use the LED light which is of the same type as the originally
supplied with the appliance.
Be sure the wine cooler stays in the upright position during transportation.
Tape the doors shut.
Turn the levelling screws up to the base to avoid damage.
Securely tape down all loose items inside your wine cooler.
Remove all the bottles.
Moving Your Wine Cooler
Most power failures are corrected within a few hours and should not
affect the temperature of your wine cooler if you minimize the number
of times the door is opened. If the power is going to be off for a longer
period of time, you need to take the proper steps to protect your contents.
Power Failure
Maintenance of Your Wine Cooler
Unplug the wine cooler, and remove the bottles.
Wash the inside with a warm water and baking soda solution. The solution
should be about 2 tablespoons of baking soda to a quart of water.
Wooden shelves does not require cleaning.
The outside of the wine cooler should be cleaned with mild detergent and
warm water.
It may also be necessary to periodically wipe the bottom part of the storage
area, as the wine cooler is designed to retain humidity, and condensation
may collect there.
Cleaning Your Wine Cooler
CAUTION: Anytime you could not unscrew the screws of the middle
clapboards with display screen on it to repair the appliance. There are
electric components inside it. It must be repaired by the professional
servicing personnel.