Filter
Top Products
16
2. Sanitizing Procedure - Following Cleaning Procedure
1) Wash all parts cleaned in the cleaning procedure using the following sanitizing solution:
1/2 fl. oz. of a 5.25% sodium hypochlorite solution (chlorine bleach) diluted in 1 gallon
of water.
2) Rinse all parts thoroughly with clean water.
3) Reassemble in the reverse order of the removal procedure.
4) Turn on the icemaker.
5) Check for proper operation.
B. Maintenance
1) Exterior Panels
To prevent corrosion, wipe occasionally with a clean, soft cloth. Use a damp cloth
containing a neutral cleaner to wipe off oil or dirt build up.
2) Due to the simple design of this ice bin, very
little maintenance is required.
Fig. 5