Filter
Top Products
8
II. Installation Instructions
A. Checks Before Installation
IMPORTANT
1. This ice bin is designed and intended to be used in combination with a
Hoshizaki Modular Icemaker. If used with another manufacturer's icemaker,
care must be taken to properly support and secure the icemaker in
accordance with the manufacturer's recommendations.
2. Remove shipping carton, tape(s) and packing to prevent damage to the ice
bin.
3. Ensure all components and fasteners are securely in place.
1) Remove the packages containing the accessories.
2) Remove the protective plastic film from the side panels. If the ice bin has
been exposed
to sunlight or direct heat, it should be allowed to cool before
removing the protective
film.
B. Location
WARNING
This ice bin is not intended for outdoor use. Normal operating ambient
temperature should be within +45°F to +100°F. Extended periods of operation
at temperatures outside of these limitations may cause unsatisfactory results.
For best operating results:
• Ice bin should not be located next to ovens, grills or other high heat producing equipment.
• Location should provide a firm and level foundation for the equipment.
• Always avoid a site where dripping is not allowed.
• Allow 6" clearance at rear and sides for ease of maintenance and/or service should they
be required.
• Ice bin should not be located in an area that receives direct sunlight.