Filter
Top Products
24
Fig. 8
9) Disengage the safety switch. Move the control switch to the "OFF" position, then move
the power switch to the "OFF" position. Turn off the power supply.
10) Clean the storage bin liner and the storage bin cover using a neutral cleaner. Rinse
thoroughly after cleaning. Replace the storage bin cover in its correct position.
WARNING! CHOKING HAZARD: Ensure all components, fasteners, and
thumbscrews are securely in place. Make sure that none have fallen into the
storage bin.
11) Move the power switch to the "ON" position, then replace the front panel in its correct
position. Turn on the power supply, then move the control switch to the "ICE" position
to start the automatic icemaking process.
I. Controls and Adjustments
1. Portion Control
A variable resistor which controls the amount of ice dispensed is located on the control
board.
The gures on the label indicate dispensing time (sec.). See Fig. 8. When shipped, the
portion control is set at the minimum dispensing time (0.6 sec.).
DCM-500BAH(-OS); DCM-500BWH(-OS) . . . . . . . . . . . . Approximately 0.72 oz./0.6 sec.
Approximate amount of ice dispensed per second.
DCM-500BAH(-OS); DCM-500BWH(-OS) . . . . . . . . . . . . Approximately 1.2 oz./sec.