Filter
Top Products
6
II. Installation and Operating Instructions
1. Checks Before Installation
WARNING
Remove shipping carton, tape(s) and packing. If packing material is left in the
icemaker, it will not work properly.
IMPORTANT
Ensure all components, fasteners and thumbscrews are securely in place.
1) Remove the front panel to prevent damage when installing the icemaker. See Fig. 1.
2) Remove the package containing the accessories from inside the icemaker.
3) Remove the protective plastic film from the panels. If the icemaker is exposed to the sun
or to heat, remove the film after the icemaker cools.
4) Check that the refrigerant lines do not rub or touch lines or other surfaces, and that the
fan blade turns freely.
5) Check that the compressor is snug on all mounting pads.
6) See the nameplate on the rear panel, and check that your voltage supplied corresponds
with the voltage specified on the nameplate.
2. How to Remove Panels
- See Fig. 1
a) Front Panel . . . . . Remove the screws.
(left)
Lift up and pull toward
you.
b) Top Panel . . . . . . Remove the screws,
then lift off.
Fig. 1